Victron Blue Smart IP67 Single Output UK Charger - 12V 7A

Victron Blue Smart IP67 Single Output UK Charger - 12V 7AVoltage: 12V Charge Current: 7A Input Voltage: 230V Number of Outputs: 1 Can Be Used As Power Supply: Yes Protection Category: IP67 Efficiency: 93% Bluetooth Enabled: Yes Plug Type: UK Dimensions: H85 x W211 x D60mm Weight: 1. 8Kg Warranty: 5 Years The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles

• Voltage: 12V
• Charge Current: 7A
• Input Voltage: 230V
• Number of Outputs: 1
• Can Be Used As Power Supply: Yes
• Protection Category: IP67
• Efficiency: 93%
• Bluetooth Enabled: Yes
• Plug Type: UK
• Dimensions: H85 x W211 x D60mm
• Weight: 1.8Kg
• Warranty: 5 Years

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles such as (classic) cars; motorbikes; boats and camper-vans.

Features

Bluetooth Smart enabled

The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current to change settings and to update the charger when new features become available. With Bluetooth the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers.

Completely encapsulated: waterproof shockproof and ignition protected

Water oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin.

The highest efficiency ever!

Setting a new industry standard: with 92% efficiency or better these chargers waste three to four times less heat. And once the battery is fully charged power consumption reduces to less than a Watt some five to ten times better than the industry standard.

Adaptive 5-stage charge algorithm: bulk- absorption- recondition- float- storage

The Blue Smart Charger features a microprocessor controlled adaptive' battery management. The adaptive' feature will automatically optimise the charging process relative to the way the battery is being used.

Storage Mode: Less maintenance and aging when the battery is not in use

The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2 2 V/cell (13 2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to equalize' the battery. This feature prevents stratification of the electrolyte and sulphation a major cause of early battery failure.

Also charges Li-ion batteries

Li-ion batteries are charged with a simple bulk- absorption- float algorithm.

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function.

Protected against overheating

Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C but the charger will not fail.

Two LEDs for status indication

Yellow LED: bulk charge (blinking fast) absorption (blinking slow) float (solid) storage (off) Green LED: power on